Moog Videolarm WS9-50FIR Instructions d'exploitation télécharger pdf

PRODUCT INSTRUCTIONS

REVISION DATE: 02-02-2009

81-IN5270 WARRIOR 9

WS9-50FIR

NOTE: THERE ARE NO USER SERVICEABLE PARTS INSIDE

THIS UNIT. OPENING THE WS9 HOUSING WILL VOID

THE WARRANTY.

STANDARD IN STAL LA TION PROCEDURE

INCLUDES MODEL: WS9

1. Select an appropriate location for the WS9 to be mounted. Place

the unit against the wall or ceiling and mark the center mounting

hole on the bracket (Figure 1).

NOTE: For additional support you may want to also place a

fastener in the slot on the mounting bracket. If so, mark

its location at this time.

2. Remove the unit and drill a hole for the appropriate mounting

hardware (not included). Mount the unit to the wall or ceiling.

NOTE: It may be necessary to remove the camera and housing

from the mounting bracket to attach the unit to the wall.

If so, the camera will need to be oriented correctly when

reattached (see below).

3. Run power and video wiring to the WS9. The exit hole for the

wiring will need to be as close to the unit as possible to eliminate

long cable runs.

4. Power for the WS9 must be from a regulated 12VDC power supply

with a voltage range between 10.8 and 13.2 DC.

NOTE: Transformer plug is female. Dimensions must be 2.1mm

I.D. and 5.5mm O.D., with a length of 9.53 to 12mm

(such as the Switchcraft S760 or equivalent)

5. Connect the video using the BNC connector.

NOTE: If you remove the camera from the bracket you

must reorient it correctly when it's replaced. A

sensor is located in the I.R. array surrounding the

camera window. This sensor indicates the bottom

of the camera.

Figure 1

Wa ll Mount Con guration

Center hole

Figure 2

Ceiling Mount Con

guration

I.R. Sensor

(bottom of camera)

1 2 3

Résumé du contenu

Page 1 - 81-IN5270 WARRIOR 9

PRODUCT INSTRUCTIONSREVISION DATE: 02-02-200981-IN5270 WARRIOR 9WS9-50FIR NOTE: THERE ARE NO USER SERVICEABLE PARTS INSIDE THIS UNIT. OP

Page 2 - 1-800-554-1124

! CAUTIONRISK OF ELECTRIC SHOCK! CAUTION: TO REDUCE THE RISK OF ELECTRICAL SHOCK, DO NOT EXPOSE COMPONENTS TO WATER OR MOISTURE.SAFETY PRECAUTIONS

Page 3 - Online Option 2: Mail-In

Product Registration/WarrantyThank you for choosing Videolarm. We value your patronage and are solely committed to providing you with only the highes

Commentaires sur ces manuels

Pas de commentaire

Moog Videolarm WS9-50FIR Instructions d'exploitation

Naviguer en ligne ou télécharger Instructions d'exploitation pour Caméras de sécurité Moog Videolarm WS9-50FIR. Moog Videolarm WS9-50FIR surveillance camera Manuel d'utilisatio

Résumé du contenu

Commentaires sur ces manuels

Produits connexes et manuels pour Caméras de sécurité Moog Videolarm WS9-50FIR